Blade Guidance & Cooling System
Carbide blade guides and bearing pre-aligners maintain blade alignment and reduce stress during cutting.

Hydraulic blade tensioning system automatically adjusts tension during start-up and relaxes during downtime for extended blade life.
Coolant is applied at four strategic points, and a synchronized blade-cleaning brush ensures chip removal and system longevity.
User-Friendly Operation & Safety
The front-facing ergonomic control station features clearly labeled controls and easy access for maintenance.
Work height sensor and air gap eliminator automatically position the sawhead for the next cut, minimizing idle time.
Specialized overhead clamping device holds grating materials firmly in place, while the discharge table includes a built-in coolant return system.
Blade break and slip detection sensors trigger automatic shutdown for maximum operator safety.
All wiring and hydraulic circuits are routed through protective conduits, and interlock systems prevent start-up unless clamps are fully engaged.

Standard Features

• Machine Structure:
• ► Oversized Precision ground, large Dual Columns support and guide the rugged saw head
• through the entire cutting cycle. The saw head adopts a back tilt design which allows the
• blade to twist less than traditional bandsaw between the wheel and blade guide; thereby
• putting less stress on the blade, insuring longer life.
• ► The oversized round columns provide hundreds of square inches of continuous surface
• contact with the sawhead throughout the entire cutting process.
• ► Cross Link is located on the top of the columns, connecting the two columns to form an
• archway design that gives it sound structural strength.
• Blade Drive:
• ► The gearbox is specially designed to accept high lateral pressure. Unlike conventional
• gearboxes, the Cosen design accepts more pressure during operation and will not create
• thermal distortion, providing long gearbox life under production conditions.
• ► Inverter blade drive system allows infinitely variable blade speeds to be controlled by the
• operator from the control panel with turn of a knob. The system comes standard with
• LED readout for convenient and accurate setting of blade speed.
• Blade Guidance & Lubrication System:
• ► Carbide guides securely guide the blade during the cutting cycle. The carbide is relieved
• so that coolant can both cool and lubricate the blade during the cut.
• ► The bearing guides eliminate blade stress by pre-aligning the blade before it enters the
• carbide guides. Two additional guides located on a central axis support the blade from the
• top, giving it extra penetrating force for faster cuts.
• ► Automatic hydraulic blade tensioning device provides correct blade tensioning when the
• machine is turned on and will slightly release the tension when the machine is not
• running. This extends blade life. The on-off hydraulic valve switch is an added feature
• making blade change quicker and easier
• ► Integral coolant system . Coolant is supplied at four critical points: exit & entry of blade
• through blade guides, middle of cut via adjustable flex hose, and blade cleaning brush.
• Synchronized power driven blade brush effectively cleans chips from blade to extend
• blade life.
• Control & Automation:
• ► The operator’s control station ergonomically located on the front side of the saw is
• convenient and user friendly. All operator controls are positioned on the top of the control
• box and clearly labeled for ease of operation. The electrical components are located inside
• the control box with the main lockout disconnect on the front of the control box for safety
• and easy maintenance.
• SH-13032
• ► Precision feed pressure & feed rate dual valve system for optimal cutting performance in
• any material.
• ► Work height sensor and air gap eliminator positions the saw frame to a safe clearance
• above the work piece, so that the next piece can be positioned without damaging the
• blade.
• Material Clamping & Feeding:
• ► Speciality Overhead clamp device is used to positively clamp grate.
• Discharge Table with built–in coolant return adequately supports cut-off stock and
• provides coolant savings in the long run.
• ► No vise clamps
• Safety:
• ► Proximity switches sense both blade slippage and blade breakage and will automatically
• shut off the machine if either of these conditions should occur.
• ► All blade covers, and guarding on the saw are painted Alert Orange to increase safety
• alertness.
• All exposed electric wiring and hydraulic circuit are protected by conduits.
• Electrical and hydraulic safety interlock prevents saw blade to start without vises securely
• clamped.

Optional Accessories

• Blade “clip” device eases blade changing when necessary by holding the blade on the
• band wheel during installation, making it very easy for one person to change the blade.
• Adjustable fence to support bundled cut-off stock
• Built in work light
• Bi-metal saw blade
• Tool Box with tools, leveling pads, and an additional wire brush
• Operation & parts manual
• Infeed and Outfeed Top Clamps

* Design and specifications are subject to change without notice & obligation.
* Machines may be shown with some options.

Type of Saw

• Horizontal

Automation

• Semi-Automatic

Miter

• NO

Production Line

• Horizontal-Mitering
• Horizontal-Column

Capacity-Max. Height (mm)

• ≦320

Capacity-Max. Width/Throat (mm)

• ≦1300

Capacity-Round (mm)

• 320

Blade / Circular Saw Width (mm)

• 34

Blade Speed Min.~Max. (M/min)

• 15~108